What Size Speakers 2015 Town And Country

2008-2016 Chrysler Town & Country minivan

Upgrading the stereo system in your Town & Land
2008 • 2009 • 2010 • 2011 • 2012 • 2013 • 2014 • 2015 • 2016

In brief: This Crutchfield Research Garage article gives you lot an overview of your Town & Country'southward stock stereo system and your aftermarket upgrade options. Use our vehicle selector to find the gear that will fit your minivan.

Overview of the Chrysler Boondocks & State

The fifth-generation Chrysler Boondocks & Country offers everything you'd desire in a luxurious, family-friendly people mover. Chrysler basically invented the American minivan dorsum in the Eighties, of grade, but this edition showed that they weren't content to rest on their laurels in the face of increased contest. With more infinite, more features and clever ideas like the Stow-N-Go rear seat, this Town & Country remains a solid choice for anyone who wants to booty kids and cargo in comfort.

In 2011, the Boondocks & Country (forth with its sibling, the Dodge Grand Caravan) received a mid-bike update that included an extensive revamp of the interior and dashboard. The changes really fabricated it much easier to remove and replace a manufacturing plant radio, and we've noted the differences below. All other installation instructions are identical to the 2008-2010 models.

The Boondocks & Country's media center (Crutchfield Research Photo)

Factory stereo system

The Town & State's base system was an AM/FM/CD/MP3 role player with 4 speakers. The next level of trim added speakers in the corner dash. The Premium Sound Organization adds a center channel speaker, rear pillar tweeters and rear side panel subwoofer, forth with a main amplifier and dedicated subwoofer amp. Optional features, similar navigation, Bluetooth® connectivity, satellite radio, a rear-view camera, and rear seat DVD amusement pumped up the Town & Country's entertainment caliber.

As you might expect, the rear-seat entertainment organization was a very popular option. The DVD player is split from the radio, and is located in the lower dash. If your van is equipped with this amusement system and you're planning to install an aftermarket stereo, you lot'll demand to purchase a radio replacement adapter to power the DVD player.

Once everything'southward hooked up, your passengers can lookout man a video while you lot enjoy music or apply your aftermarket navigation organization up front. Aftermarket DVD/nav receivers volition not work with the manufactory fold-down screens so you'll still need the above adapter to retain the factory DVD player.

If your minivan was not equipped with a factory amusement system, you tin ever add an aftermarket system.

Detailed stereo and speaker removal instructions

With step-past-pace disassembly instructions and plenty of upwardly-shut, detailed photos, our exclusive Crutchfield MasterSheet™ takes the guesswork out of removing the factory stereo and speakers. It's gratuitous with your Crutchfield order, or you can purchase one separately for just $ix.99.

Replacing your factory radio

The degree of difficulty involved in the radio removal procedure depends on your Boondocks & Country'due south model yr.

Removing the factory radio (2008-10)

A wide multifariousness of unmarried-DIN units will fit neatly into the Boondocks & Country'due south dash with the help of the mounting kit that'due south discounted with your stereo purchase from Crutchfield.

If you're planning to install a double-DIN receiver, exist prepared for a chip more than work. The culprit is a metal support bracket that gets in the style when y'all're replacing the "premium" factory receiver. You'll demand to cut this subclass out using a hacksaw. If y'all're extremely confident in your skills, go on. If not, you might want to consult a car stereo installation professional person.

These four tabs need to exist removed in lodge to fit a double-DIN stereo (Crutchfield Research Photograph)

The 2008-ten Boondocks & Country features a dash assembly that's really a series of interlocking pieces starting at the A-pillars. To remove the radio, you'll need to pry those off, then gradually work your way through a series of trim panels until the radio is fully accessible. This takes fourth dimension, but it'south non hard. Be sure to piece of work slowly and carefully, though. Y'all don't want to mar the trim panels or snap off the plastic retaining clips, so, to borrow a line from one-time Chrysler endorser Frank Sinatra, have it "nice and like shooting fish in a barrel" during this process

One time you've worked your manner through the diverse panels and pieces, installing your new stereo is but a affair of securing the receiver to the mounting bracket, connecting the wiring adapter to the stereo wires, and plugging that into the van'due south wiring. The wiring adapter for the Town & Country is a special adapter that's needed so that the new stereo will work with the van'south electronics, and Crutchfield offers information technology at a overnice discount with the purchase of your new receiver.

Tools needed: Panel tool, Phillips screwdriver, Torx T-30 driver, small flat bract screwdriver

Here's what an aftermarket receiver looks like in a T&C. (Crutchfield Inquiry Photo)

Removing the manufacturing plant radio (2011-xvi)

A 2011 dashboard redesign fabricated the process of removing a radio from a Chrysler Town & Country much, much easier. The painstaking process of removing multiple trim pieces with multiple tools was gone, replaced by a stereo removal process that can exist summed up in two sentences:

one. Starting at either upper corner, pry out the receiver trim panel to release the clips and remove the trim panel.

ii. Remove four Phillips screws securing the receiver to the nuance, disconnect the harnesses and remove the receiver.

And that'south that. Your neighbor with the 2009 model will be green with green-eyed. Well, until he sees that y'all're installing a double-DIN receiver. Alas, the premium stereo-equipped 2011 models still have that same metallic back up in the dash, and so you'll still need to cut the brace away with a hacksaw. This can be hard, and so exist prepared to consult a professional of you're not comfy doing the job. Or, you can ever ask your neighbor.

Tools needed: Console tool, Phillips screwdriver

Steering wheel controls

It's relatively easy to retain the steering wheel audio controls when you install a new stereo in your Town & Country . When you enter your vehicle information, our database volition choose the adapter yous need to brand your mill steering wheel controls work with your new receiver.

Shop for machine stereos that fit your Chrysler Town and Country

Replacing your factory speakers

Depending on the model, the Town & Land offered manufactory speakers in the forepart doors, the dash, the rear side panels, and the rear pillars.

The half-dozen"x9" front speakers are easy to accomplish and easy to replace (Crutchfield Enquiry Photograph)

Removing the front door speakers

The Town & Country's stock forepart speakers, regardless of trim level, are 6"x9" units. The base models are four Ohm, while the premium models are 2 Ohm. If you're keeping the factory amp, you'll need to utilize low-impedence replacements (from Infinity or JBL, for example), or you lot'll observe a dramatic drop-off in sound.

A variety of half-dozen"x9" speakers volition fit into the factory openings, but some volition necessitate a bit of modification due to crenel space issues. We by and large recommend smaller speakers for this location, and a wide diversity of v-1/iv" or 6-1/2" speakers will fit using mounting brackets, which are included with your buy.

Installation is relatively elementary. You'll demand to remove the front door console, of course, but the free instructions provided by Crutchfield assistance make this a straightforward process.

Tools needed: Console tool, small apartment blade screwdriver, Torx T-20 commuter

A look at the factory center nuance speaker (Crutchfield Research Photo)

Removing the dash speakers

Some Town & Country models are equipped with dash speakers – 2 corner speakers and, with the premium system, a center speaker. These speakers, which are wired in parallel with the door speakers, are prissy to have and hard to supervene upon. The corner nuance openings are besides shallow for nigh aftermarket 3-1/two" speakers. The eye speaker has a 3-ane/2" bolt pattern, just once more, there's isn't enough space for an aftermarket speaker. Instead, this a slap-up location to mount tweeters. You'll need to create a mounting bracket for them, and nosotros offer a universal backstrap that we oft recommend for just that.

Rear side panel speaker on a Chrysler Town & Country (Crutchfield Research Photo)

Removing the rear speakers

The Town & Land's rear speakers are half dozen"x9" models located on the mid-rear side panels. They're very easy to access and replace. Stock-size models fit correct in, using the wiring harness that's gratuitous with your speaker purchase.

You lot tin can also cull from a wide option of 5-1/four" or 6-ane/2" speakers. The smaller speakers require mounting brackets, which are as well included with your buy.

Tools needed: Panel tool, Phillips screwdriver

Removing the rear tweeters

A pair of rear colonnade tweeters were included in the premium stereo package. They're hard to reach and fifty-fifty harder to supplant. A fair amount of trim must be removed to access the tweeter location, where yous'll observe 2-ane/2" tweeters clipped into the factory bracket. Bold you can even detect aftermarket units that fit, yous'll have to fabricate all-new brackets to hold them. Frankly, the benefits don't warrant the endeavor, so we'd suggest leaving the tweeters right where they are.

Shop for speakers that fit your Chrysler Town and Country

Powered subs similar the Audio Ordnance B-8PT are great options for minivans.

Bass in your Boondocks & State

The Town & Land was designed to transport passengers and cargo in luxurious comfort. Huge aftermarket sub enclosures actually weren't factored into the equation. Thankfully, it's all the same possible to add together bass without losing the T&C's everyday luxury and utility.

Powered subwoofers accept long been favorites of minivan owners who want to add bass without losing much cargo space. These compact subs evangelize a big, beefy low-end punch without taking up tons of room in the back of the van. Available in a multifariousness of shapes and sizes, these subs sound great and fit in out-of-the-way places.

The 10-speaker premium sound system came with a factory-installed subwoofer and amp. An aftermarket viii" sub will fit nicely in the opening, which can be reached by removing the rear side console. This isn't a quick and easy job, simply it's non terribly difficult, either. You'll accept to re-drill the mounting spiral holes to install your aftermarket subwoofer, but the new piece will fit under the factory grilles.

The factory subwoofer in the premium organisation (Crutchfield Enquiry Photo)

If you do replace the 8" manufacturing plant sub with an aftermarket model, we recommend that you also add an aftermarket amp. The manufacturing plant amp, located backside the left rear quarter panel below the left rear speaker, served its purpose well, but if you're investing in a meliorate sub, y'all should requite it all the ability information technology needs.

To supervene upon it, you'll need to remove the two 10mm bolts securing the sub enclosure to the side wall, disconnect the harness and remove the enclosure. Next, you'll loosen the iii 10mm bolts securing the amp to the side wall, elevator the amp, disconnect the harnesses and remove the amp.

Tools needed: Panel tool, Phillips screwdriver, drill and a one/8" chip

Other options for your Town & Country

In that location are plenty of other ways to better your Town & Land. Hither are a few good ideas:

These WeatherTech floor mats will probably outlast your Town & Country.

Floor mats

If you've always owned a minivan of any kind, yous don't need us to remind you of what tin can happen when you hit the road carrying any combination of adults, kids, pets, and nutrient. Flooring mats and cargo mats from WeatherTech will help protect your floors from dirt, damage and discarded juice boxes. Every bit for the seats, door panels, roof and everywhere else a scoop of water ice cream tin possibly land, we recommend WeatherTech's TechCare car care products.

Manufactory sound processor

If you don't want to replace your manufacturing plant radio, a audio processor is a bang-up way to improve your Boondocks & Country's system operation. The mill stereo is programmed to make the inferior factory speakers sound their all-time, which oft means dialing dorsum the bass output every bit you increase the volume. This can make new speakers under-perform and sound weak. A sound processor will strip out that sound shaping and requite you a make clean, flat signal to send to your aftermarket speakers and amps. Read more than near manufacturing plant sound processors.

Security systems

Installing a security system in your Boondocks & Country isn't easy (security systems rarely are), but it'southward definitely a good idea. Our Crutchfield Advisors can help figure out what yous need to become the task done, but we usually recommend taking your car and new gear to a professional person installer.

Shop for car security systems for your Chrysler Town and Country

Observe the audio gear that fits your car or truck

Visit our Outfit My Car page and enter your vehicle information to see stereos, speakers, subs, and other audio accessories that will work in your vehicle.

What Size Speakers 2015 Town And Country,

Source: https://www.crutchfield.com/ISEO-rgbtcspd/learn/2008-chrysler-town-country-minivan.html

Posted by: irishdientiong.blogspot.com

Share this post